Inspection Procedure

1. Check that the display is not in "Screen OFF" mode.

   OK: 

   The display setting is not in "screen OFF" mode. 

NG: CHANGE SCREEN TO "SCREEN ON" MODE 

OK: Go to next step 

1. Check that the screen color quality can be set.

   OK: 

   Setting is possible. 

OK: PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL 

NG: Go to next step 

1. Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

   HINT:

   • A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may short circuit the screen.
   • The appropriate cabin temperature is 20 to 30°C (68 to 86°F).

   OK: 

   Condensation is not likely and temperature is not high or extremely low. 

NG: SET CABIN TO APPROPRIATE TEMPERATURE 

OK: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE