Inspection Procedure

CHECK TOUCH PANEL
1. Check for foreign matter on the display.
  OK:
  
  The display is clean.
NG: CLEAN DISPLAY AND RECHECK TOUCH PANEL

OK: Go to next step
CHECK TOUCH SWITCH (DISPLAY CHECK MODE)
1. Enter the "Display Check" mode (Touch Switch Check) (see DISPLAY CHECK MODE ).
2. Touch the display in the area where the switch malfunction occurs.
  OK:
  
  A "+" mark appears at the touched position.
Fig 1: Display Check Mode - Touch Switch Check
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: REPLACE MULTI-DISPLAY

OK: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE