Entertainment Systems: Audio/Visual: Multi-Display: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL NO. 2 RADIO BRACKET (See  INSTALLATION  ) 
2. INSTALL NO. 1 RADIO BRACKET (See  INSTALLATION  ) 
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (See  INSTALLATION  ) 
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See  INSTALLATION  ) 
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See  INSTALLATION  ) 
6. INSTALL CONSOLE UPPER PANEL ASSEMBLY (See  INSTALLATION  ) 
7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See  INSTALLATION  ) 
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
9. PERFORM INITIALIZATION 
   1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.