LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual >> Network Gateway Ecu >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Network Gateway Ecu: Installation

  1. INSTALL NETWORK GATEWAY ECU 
    1. Install the ECU.
    2. Attach the 2 claws to install the cover.
      Fig 1: Identifying Network Gateway ECU Cover Claws
      G05299628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the connector.
  2. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  INSTALLATION  ) 
  5. INSTALL INSTRUMENT SIDE PANEL RH (See  INSTALLATION  ) 
  6. INSTALL FRONT DOOR OPENING TRIM COVER RH (See  INSTALLATION  ) 
  7. INSTALL FRONT DOOR SCUFF PLATE RH (See  INSTALLATION  ) 
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See  INSTALLATION  ) 
  9. INSTALL CONSOLE UPPER PANEL ASSEMBLY (See  INSTALLATION  ) 
  10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See  INSTALLATION  ) 
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. PERFORM INITIALIZATION 
    1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  13. CHECK SRS WARNING LIGHT 
    1. Check SRS warning light (See AIRBAG SYSTEM ).
scientia non olet · About LEMON Manuals