Steering Pad Switch: Installation

INSTALL STEERING PAD SWITCH LH
1. Hold the connector cover and connect the switch to the steering pad switch cable.
  
  Fig 1: Locating Connecting Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Attach the 2 claws and close the connector cover.
  
  Fig 2: Identifying Connector Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the steering pad switch cable's tab to the switch, as shown in the illustration.
  
  Fig 3: Locating Steering Pad Switch Cable's Tab
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the clip and 2 claws to install the switch.
5. Install the screw.
6. Connect the connectors.
Fig 4: Identifying Steering Pad Switch Clip And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD SWITCH RH
1. Hold the connector cover and connect the switch to the steering pad switch cable.
  
  Fig 5: Locating Connecting Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Attach the 2 claws and close the connector cover.
  
  Fig 6: Identifying Connector Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Attach the steering pad switch cable's tab to the switch, as shown in the illustration.
  
  Fig 7: Locating Steering Pad Switch Cable's Tab
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the clip and 2 claws to install the switch.
  
  Fig 8: Identifying Steering Pad Switch Clip And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the screw.
INSTALL STEERING WHEEL PAD (See INSTALLATION )
INSTALL NO. 2 STEERING WHEEL COVER LOWER
INSTALL NO. 3 STEERING WHEEL COVER LOWER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (See INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
CHECK SRS WARNING LIGHT
1. Check SRS warning light (See AIRBAG SYSTEM ).