Outer Mirror Switch: Installation
- INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
- Connect the connector.
- Attach the 2 claws to install the control panel.
- Install the 2 screws.
- INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
- INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See INSTALLATION )
- INSTALL INSTRUMENT SIDE PANEL LH (See INSTALLATION )
- INSTALL FRONT DOOR OPENING TRIM COVER LH (See INSTALLATION )
- INSTALL FRONT DOOR SCUFF PLATE LH (See INSTALLATION )
- INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
- INSTALL CONSOLE UPPER PANEL ASSEMBLY (See INSTALLATION )
- INSTALL FRONT CONSOLE UPPER PANEL GARNISH (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (See
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (See
INITIALIZATION
).
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (See AIRBAG SYSTEM ).