Data List / Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Read the DATA LIST.
Front multiplex network door ECU LH, RH:
DIAGNOSIS NOTE CHARTItem Measurement Item / Display (Range) Normal Condition Diagnostic Note MIR POS SEN V Vertical mirror position / Min.: 0, Max.: 5 V Within 0 to 5 V - MIR POS SEN H Horizontal mirror position / Min.: 0, Max.: 5 V Within 0 to 5 V - MIR LOCK DETECT Mirror retract motor lock detection signal / ON or OFF ON: Mirror retract motor lock signal is detected
OFF: Mirror retract motor lock signal is not detected- Integration control and panel assembly:
DIAGNOSIS NOTE CHARTItem Measurement Item / Display (Range) Normal Condition Diagnostic Note MIRR SEL SW R Mirror master switch signal for RH mirror / ON or OFF ON: Switch is in R position
OFF: Switch is OFF or in L position- MIRR SEL SW L Mirror master switch signal for LH mirror / ON or OFF ON: Switch is in L position
OFF: Switch is OFF or in R position- MIRR POS SW R Mirror control switch signal (RIGHT) / ON or OFF ON: RIGHT switch is ON
OFF: Any switch except RIGHT is ON or all switches are OFF- MIRR POS SW L Mirror control switch signal (LEFT) / ON or OFF ON: LEFT switch is ON
OFF: Any switch except LEFT is ON or all switches are OFF- MIRR POS SW UP Mirror control switch signal (UP) / ON or OFF ON: UP switch is ON
OFF: Any switch except UP is ON or all switches are OFF- MIRR POS SW DWN Mirror control switch signal (DOWN)/ON or OFF ON: DOWN switch is ON
OFF: Any switch except DOWN is ON or all switches are OFF- MIRR FOLD SW Mirror retract switch signal / ON or OFF ON: Switch is ON (retracting)
OFF: Switch is OFF (returning)-