Perform Active Test
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in the troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Perform the ACTIVE TEST by following the directions on the tester screen.
Front multiplex network door ECU LH, RH:
DIAGNOSIS NOTE CHART
| Item | Test Details | Diagnostic Note |
|---|---|---|
| MIRR HEATER | Mirror heater operation OFF / ON | - |
| MIRR FOLD / RETRN | Mirror retract operation FOLD / RETURN | - |
| MIRR RIGHT / LEFT | Mirror horizontal operation RIGHT / LEFT | - |
| MIRR UP / DOWN | Mirror vertical operation UP / DOWN | - |