Inspection Procedure
- CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY FUNCTION (MIRROR MASTER SWITCH FUNCTION)
- Check that the outer rear view mirror assembly LH and RH can be moved using the mirror master switch of the integration control and panel assembly.
OK:
Outer rear view mirror assembly LH and RH can be moved using mirror master switch of integration control and panel assembly.
NG: GO TO PROBLEM SYMPTOMS TABLE
OK: Go to next step
- Check that the outer rear view mirror assembly LH and RH can be moved using the mirror master switch of the integration control and panel assembly.
- CHECK OPERATION OF SHIFT INDICATOR
- Check that the shift indicator of the combination meter operates normally.
OK:
Shift indicator of combination meter operates normally.
NG: GO TO COMBINATION METER
OK: Go to next step
- Check that the shift indicator of the combination meter operates normally.
- CHECK FRONT MULTIPLEX NETWORK DOOR ECU
- Check if the malfunction disappears when a normally functioning front multiplex network door ECU.
Result
RESULT CHARTResult Proceed to Outer rear view mirror LH does not operate normally A Outer rear view mirror RH does not operate normally B Outer rear view mirror LH operates normally C Outer rear view mirror RH operates normally D
B: REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH
C: REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH
D: REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH
A: REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH
- Check if the malfunction disappears when a normally functioning front multiplex network door ECU.