LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Brake Pedal Stroke Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pedal Stroke Sensor: Removal

  1. DISCONNECT BATTERY CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE CONSOLE UPPER PANEL GARNISH FRONT (See  REMOVAL  ) 
  3. REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See  REMOVAL  ) 
  5. REMOVE FRONT DOOR SCUFF PLATE LH (See  REMOVAL  ) 
  6. REMOVE FRONT DOOR OPENING TRIM COVER LH (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT SIDE PANEL LH (See  REMOVAL  ) 
  8. REMOVE INSTRUMENT PANEL NO.1 UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  9. REMOVE INSTRUMENT PANEL NO.1 SAFETY PAD SUB-ASSEMBLY (See  REMOVAL  ) 
  10. REMOVE INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1 (See  INSTALLATION  ) 
  11. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Disconnect the brake pedal stroke sensor assembly connector.
    2. Remove the 2 nuts and the brake pedal stroke sensor assembly.
      Fig 1: Removing Brake Pedal Stroke Sensor Assembly With Nuts
      G05297196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals