Meter / Gauge System: Initialization
- OIL MAINTENANCE INFORMATION MODE RESET OPERATION
HINT:
The reset switch is located inside the integration control and panel assembly on the left side of the instrument panel.
- Turn the engine switch on (IG) while pressing and holding the reset switch. Hold the reset switch until the following conditions are met and 5 seconds have passed.
- The display shows "OIL MILEAGE RESET".
- The master warning light illuminates.
- When "OIL MILEAGE RESET" disappears and the master warning light turns off, the reset is complete.
- Turn the engine switch on (IG) while pressing and holding the reset switch. Hold the reset switch until the following conditions are met and 5 seconds have passed.