LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System (3UZ-FE) >> Camshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Inspection

  1. INSPECT CAMSHAFT POSITION SENSOR 
    1. Measure the resistance between the terminals.

      Standard resistance

      SPECIFIED CONDITION CHART

      Temperature Specified Condition
      Cold 835 to 1,400 Ω
      Hot 1,060 to 1,645 Ω
      NOTE: In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).
      If the resistance is not as specified, replace the sensor.
    Fig 1: Inspecting Camshaft Position Sensor
    G05285779Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals