LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System (3UZ-FE) >> Camshaft Timing Oil Control Valve Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Installation

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH 
    1. Install a new O-ring to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

    3. Connect the oil control valve connector.
      Fig 1: Locating Bolt And Oil Control Valve
      G05291577Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH 
    1. Install a new O-ring to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

    3. Connect the oil control valve connector.
      Fig 2: Locating Bolt And Oil Control Valve
      G05291575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL INTAKE AIR CONNECTOR PIPE 
    1. Install the intake air connector pipe with the bolt and 2 hose clamps.
      Fig 3: Locating Intake Air Connector Pipe With Bolt And Hose Clamps
      G05285771Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 4.0 N*m (41 kgf*cm, 35 in.*lbf) for hose clamp 

      5.0 N*m (51 kgf*cm, 44 in.*lbf) for bolt 

    2. Connect the air hose and No. 1 ventilation hose.
  4. INSTALL NO. 1 AIR CLEANER INLET 
    1. Install the air cleaner inlet and bolt.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

  5. INSTALL V-BANK COVER 
    1. Install the V-bank cover with the 2 nuts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

  6. INSTALL ENGINE ROOM SIDE COVER LH 
    1. Install the side cover with the 3 clips.
      Fig 4: Identifying Clips And Side Cover
      G05285764Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL ENGINE ROOM SIDE COVER RH 
    1. Install the side cover with the 2 clips and nut.
      Fig 5: Locating Nut, 2 Clips And Side Cover
      G05285773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL COOL AIR INTAKE DUCT SEAL 
    1. Install the intake duct seal with the 7 clips.
      Fig 6: Identifying Clips And Intake Duct Seal
      G05285762Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  10. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals