LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System (3UZ-FE) >> SFI System >> Mass Air Flow Meter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Installation

  1. INSTALL INTAKE AIR FLOW METER 
    1. Install a new O-ring to the MAF meter.
    2. Install the MAF meter with the 2 screws.
      Fig 1: Locating Screws And MAF Meter
      G05285758Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the MAF meter connector.
  2. INSTALL V-BANK COVER 
    1. Install the V-bank cover with the 2 nuts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

  3. INSTALL ENGINE ROOM SIDE COVER RH (See  CAMSHAFT POSITION SENSOR  ) 
  4. INSTALL COOL AIR INTAKE DUCT SEAL (See  CAMSHAFT POSITION SENSOR  ) 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals