LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition (3UZ-FE) >> Ignition Coil >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil: Installation

  1. INSTALL IGNITION COIL 
    1. Connect a new ignition coil to the spark plug, attach the ignition coil to the cylinder head cover, and install the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the ignition coil connector.
      Fig 1: Locating Ignition Coil
      G05287703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL V-BANK COVER (See  INSTALLATION  ) 
  3. INSTALL NO. 1 AIR CLEANER INLET (See  INSTALLATION  ) 
  4. INSTALL ENGINE ROOM SIDE COVER LH (See  INSTALLATION  ) 
  5. INSTALL ENGINE ROOM SIDE COVER RH (See  INSTALLATION  ) 
  6. INSTALL COOL AIR INTAKE DUCT SEAL (See  INSTALLATION  ) 
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  8. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals