Floor Shift Assembly: Disassembly

REMOVE SHIFT LOCK RELEASE BUTTON COVER
1. Using a screwdriver, remove the shift lock release button cover.
REMOVE POSITION INDICATOR HOUSING UPPER
1. Disconnect the indicator light wire sub-assembly from the shift lever plate.
2. Using a screwdriver, remove the position indicator housing upper.
Fig 1: Locating Position Indicator Upper Housing Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR LENS
1. Using a screwdriver, remove the position indicator lens from the position indicator housing upper.
Fig 2: Identifying Position Indicator Lens
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Remove the indicator light wire sub-assembly from the position indicator lower.
2. Remove the position indicator bulb from the indicator light wire sub-assembly.
3. Remove the position indicator bulb cap from the position indicator bulb.
  
  Fig 3: Identifying Indicator Light Wire Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the transmission control switch connector from the floor shift assembly.
  
  Fig 4: Identifying Transmission Control Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using a screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear.
Fig 5: Identifying Transmission Control Switch Connector Terminals
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE BUTTON
1. Remove the shift lock release button and spring from the floor shift assembly.
Fig 6: Identifying Shift Lock Release Button
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR SLIDE COVER
1. Remove the position indicator slide cover from the shift lever guide housing.
2. Remove the position indicator slide cover No.2 from the position indicator slide cover.
Fig 7: Identifying Position Indicator Slide Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Remove the shift lever nut and lock pin from the floor shift assembly.
2. Remove the shift lever guide housing from the floor shift assembly.
  NOTE: First remove the shift lever nut and lock pin, then disengage the 2 claws.
  
  Fig 8: Identifying Shift Lever Guide Housing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 screws and shift lock control ECU sub-assembly.
Fig 9: Locating Shift Lock Control ECU Sub-Assembly Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR HOUSING LOWER
1. Remove the position indicator housing lower from the shift lever guide housing.
Fig 10: Identifying Position Indicator Lower Housing
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE TRANSMISSION CONTROL SWITCH
1. Remove the transmission control switch from the shift lever guide housing.
Fig 11: Identifying Transmission Control Switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002