LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Floor Shift Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Shift Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See  REMOVAL  ) 
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See  REMOVAL  ) 
  6. REMOVE CONSOLE BOX PLATE (See  REMOVAL  ) 
  7. REMOVE CONSOLE BOX REGISTER ASSEMBLY (See  REMOVAL  ) 
  8. REMOVE CONSOLE BOX (See  REMOVAL  ) 
  9. REMOVE NO.2 CONSOLE BOX DUCT (See  REMOVAL  ) 
  10. REMOVE FRONT EXHAUST PIPE ASSEMBLY 

    (See INSTALLATION )

  11. REMOVE FRONT FLOOR HEAT INSULATOR NO.1 (See  REMOVAL  ) 
  12. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Remove the nut and separate the floor shift gear shifting rod sub-assembly.
      Fig 1: Locating Floor Shift Gear Shifting Rod Nut
      G05295396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE FLOOR SHIFT ASSEMBLY 
    1. Disconnect the connectors.
    2. Remove the 4 bolts.
    3. Remove the floor shift assembly.
      Fig 2: Locating Floor Shift Assembly Bolts
      G05288268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals