LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror >> Power Mirror Control System >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Read the DATA LIST.

      Front multiplex network door ECU (LH, RH): 

      DATA LIST REFERENCE

      Tester Display Measurement Item/Range Normal Condition
      MIR POS SEN V Vertical mirror position / Min.: 0, Max.: 5 V Within 0 to 5 V
      MIR POS SEN H Horizontal mirror position / Min.: 0, Max.: 5 V Within 0 to 5 V
      MIR LOCK DETECT Mirror retract motor lock detection signal / ON or OFF ON: Mirror retract motor lock signal is detected
      OFF: Mirror retract motor lock signal is not detected

      Integration control and panel: 

      DATA LIST REFERENCE

      Tester Display Measurement Item/Range Normal Condition
      MIRR SEL SW R Mirror master switch signal for RH mirror / ON or OFF ON: Switch is in R position
      OFF: Switch is OFF or in L position
      MIRR SEL SW L Mirror master switch signal for LH mirror / ON or OFF ON: Switch is in L position
      OFF: Switch is OFF or in R position
      MIRR POS SW R Mirror control switch signal (RIGHT) / ON or OFF ON: RIGHT switch is ON
      OFF: Any switch except RIGHT is ON or all switches are OFF
      MIRR POS SW L Mirror control switch signal (LEFT) / ON or OFF ON: LEFT switch is ON
      OFF: Any switch except LEFT is ON or all switches are OFF
      MIRR POS SW UP Mirror control switch signal (UP) / ON or OFF ON: UP switch is ON
      OFF: Any switch except UP is ON or all switches are OFF
      MIRR POS SW DWN Mirror control switch signal (DOWN) / ON or OFF ON: DOWN switch is ON
      OFF: Any switch except DOWN is ON or all switches are OFF
      MIRR FOLD SW Mirror retract switch signal / ON or OFF ON: Switch is ON (retracting)
      OFF: Switch is OFF (returning)
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in the troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Perform the ACTIVE TEST by following the directions on the tester screen.

      Front multiplex network door ECU (LH, RH): 

      ACTIVE TEST REFERENCE

      Tester Display Test Part Control Range
      MIRR HEATER Mirror (heater operation) ON or OFF
      MIRR FOLD / RETRN Mirror (retract operation) FOLD or RETURN
      MIRR RIGHT / LEFT Mirror (horizontal operation) RIGHT or LEFT
      MIRR UP / DOWN Mirror (vertical operation) UP or DOWN
scientia non olet · About LEMON Manuals