Data List / Active Test

READ DATA LIST

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

Connect the intelligent tester (with CAN VIM) to the DLC3
Turn the power switch ON (IG).

Read the DATA LIST.

Multiplex network master switch

DATA LIST

Item	Measurement Item / Display (Range)	Normal Condition
P/W AUTO SW	Driver side power window auto UP / DOWN switch / ON or OFF	ON: Driver side power window auto UP / DOWN switch on master switch operated OFF: Driver side power window switch on master switch not operated
P/W UP SW	Driver side power window manual UP switch / ON or OFF	ON: Driver side power window manual UP switch on master switch operated OFF: Driver side power window switch on master switch not operated
P/W DOWN SW	Driver side power window manual DOWN switch / ON or OFF	ON: Driver side power window manual DOWN switch on master switch operated OFF: Driver side power window switch on master switch not operated
P P/W AUTO SW	Front passenger side power window remote auto UP / DOWN switch / ON or OFF	ON: Front passenger side power window remote auto UP / DOWN switch on master switch operated OFF: Front passenger side power window switch on master switch not operated
P P/W UP SW	Front passenger side power window remote manual UP switch / ON or OFF	ON: Front passenger side power window manual UP switch on master switch operated OFF: Front passenger side power window switch on master switch not operated
P P/W DOWN SW	Front passenger side power window remote manual DOWN switch / ON or OFF	ON: Front passenger side power window remote manual DOWN switch on master switch operated OFF: Front passenger side power window switch on master switch not operated
RR P/W AUTO SW	Rear power window RH remote auto UP / DOWN switch / ON or OFF	ON: Rear power window RH remote auto UP / DOWN switch on master switch operated OFF: Rear power window RH switch on master switch not operated
RR P/W UP SW	Rear power window RH remote manual UP switch / ON or OFF	ON: Rear power window RH remote UP switch on master switch operated OFF: Rear power window RH switch on master switch not operated
RR P/W DOWN SW	Rear power window RH remote manual DOWN switch / ON or OFF	ON: Rear power window RH manual DOWN switch on master switch operated OFF: Rear power window RH switch on master switch not operated
RL P/W AUTO SW	Rear power window LH remote auto UP / DOWN switch / ON or OFF	ON: Rear power window LH auto UP / DOWN switch on master switch operated OFF: Rear power window LH switch on master switch not operated
RL P/W UP SW	Rear power window LH remote manual UP switch / ON or OFF	ON: Rear power window LH manual UP switch on master switch operated OFF: Rear power window LH switch on master switch not operated
RL P/W DOWN SW	Rear power window LH remote manual DOWN switch / ON or OFF	ON: Rear power window LH manual DOWN switch on master switch operated OFF: Rear power window LH switch on master switch not operated
P/W LOCK SW	Power window LOCK switch / ON or OFF	ON: Power window LOCK switch pushed OFF: Power window lock switch not pushed
GLASS POS-(1/4)	Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position.
GLASS POS-(1/4-1/2)	Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position.
GLASS POS-(1/2-3/4)	Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position.
GLASS POS-(OPEN)	Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION	OK: Margin is sufficient during manual UP operation CAUTION: May be displayed even when no resistance is applied in either position. In this case there is a foreign object stuck in that position.

Main body ECU RH

DATA LIST

Item	Measurement Item / Display (Range)	Normal Condition
D DOR CTY SW	Driver side door courtesy switch / ON or OFF	ON: Driver door is opened OFF: Driver door is closed
P DOR CTY SW	Front passenger side door courtesy switch / ON or OFF	ON: Front passenger door is opened OFF: Front passenger door is closed

PERFORM ACTIVE TEST

NOTE: Be careful to avoid injuries as this test causes vehicle parts to move.

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

Connect the intelligent tester (with CAN VIM) to the DLC3
Turn the power switch ON (IG).

Perform the ACTIVE TEST by following the directions on the tester screen.

Multiplex network master switch

ACTIVE TEST REFERENCE

Item	Tester Details
P/W UP/DOWN	Power window UP / DOWN