Inspection Procedure
NOTE:
When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration (see INITIALIZATION
).
- CHECK DTC FOR VGRS SYSTEM
- Clear the DTC (see DTC CHECK / CLEAR ).
- Check for the DTC (see
DTC CHECK / CLEAR
).
Result
RESULTCondition Proceed to DTC (VGRS system) is not output A DTC (VGRS system) is output B
B: REPAIR VGRS SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
A: GO TO Next Step
- RECONFIRM DTC
- Clear the DTC (see DTC CHECK / CLEAR ).
- Turn the power switch ON (IG).
- Check if the same DTC is recorded (see DTC CHECK / CLEAR
).
Result
RESULTCondition Proceed to DTC (C1289/41) is not output A DTC (C1289/41) is output B
B: GO TO step 1
A: END