On-Vehicle Inspection
- CHECK BATTERY NOTE: If the battery is fully depleted or "READY" does not light up, recharge the battery. Check the battery again before the vehicle is returned to the customer.
- Check the battery for damage and deformation. If severe damage, deformation or leakage is found, replace the battery.
- CHECK BATTERY TERMINAL AND FUSE
- Visually check the battery terminals.
- Check that the battery terminals are not loose or corroded.
- Measure the resistance of the H-fuses and fuses.
Standard resistance:
Below 1 Ω
If the results are not as specified, replace the fuses as necessary.
- Visually check the battery terminals.