LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging >> Battery >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Charging Systems: Charging: Battery: Removal

  1. PERFORM SERVICE PLUG GRIP  (See REMOVAL )
  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT  (See REMOVAL )
  3. REMOVE BATTERY SERVICE HOLE COVER LH  (See REMOVAL )
  4. REMOVE TOOL BOX  (See REMOVAL )
  5. REMOVE BATTERY 
    1. Disconnect the cable from negative (-) battery terminal.
      CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
      Fig 1: Locating Battery Clamp
      G05303666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the cable from positive (+) battery terminal.
    3. Disconnect the thermistor sensor connector.
    4. Disconnect the battery room ventilation hose.
    5. Disconnect the wire harness of the fuse holder's clamp from the battery clamp.
    6. Remove the bolt, nut and battery clamp.
    7. Remove the battery.
  6. REMOVE BATTERY TRAY 
    1. Remove the 3 bolts and tray.
  7. REMOVE NO. 2 BATTERY (for Active Stabilizer System) 
    1. Disconnect the cable from negative (-) battery terminal.
    2. Disconnect the cable from positive (+) battery terminal.
    3. Remove the battery insulator.
    4. Disconnect the battery room ventilation hose.
    5. Remove the bolt, nut and battery clamp.
    6. Remove the battery.
      Fig 2: Locating Battery Terminal
      G05303667Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE ACTIVE STABILIZER BATTERY CURRENT SENSOR ASSEMBLY (for Active Stabilizer System) 
    1. Disconnect the sensor connector.
    2. Remove the bolt from the body panel.
    3. Remove the nut and sensor.
      4. Fig 3: Locating Sensor Connector
      G05303668Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE BATTERY TRAY (for Active Stabilizer System) 
    1. Remove the 3 bolts and tray.
scientia non olet · About LEMON Manuals