LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Meter: Installation

  1. INSTALL COMBINATION METER GLASS 
    1. Attach the 7 claws to install the glass.
      Fig 1: Identifying Claws Location
      G05299373Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the combination meter glass's wire harness with the clamps.
      Fig 2: Identifying Combination Meter Glass Wire Harness With Clamps
      G05299375Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the 3 connectors.
      Fig 3: Locating Connectors
      G05299372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Close the cover and attach the 2 claws.
      Fig 4: Locating Combination Meter Glass Cover And Claws
      G05299377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Install the combination meter with the 4 screws.
      Fig 5: Locating Combination Meter And Screws
      G05300364Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Connect the connector.
    2. Attach the 5 clips to install the cluster finish panel.
      3. Fig 6: Identifying Cluster Finish Panel
      G05299379Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL STEERING COLUMN COVER UPPER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION (2006/02-2006/07) ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  7. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM (2006/02-2006/07) ).
scientia non olet · About LEMON Manuals