Inspection Procedure

1. Delete the DTCs.

   HINT:

   After all DTCs are cleared, check if the trouble occurs again 5 seconds after the power switch is turned ON (IG).

2. Check for DTCs again.

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

   HINT:

   "Each system" means the smart access system and engine immobiliser system.

B:  GO TO DTC CHART 

A:  GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START  (for Door Lock)