Data List / Active Test

READ DATA LIST

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST relay in troubleshooting is one way to save time.

Connect the intelligent tester (with CAN VIM) to the DLC3.
Turn the power switch ON (IG).

Read the DATA LIST.

Power source control ECU:

POWER SOURCE CONTROL ECU - DATA LIST REFERENCE

Item	Measurement Item / Display (Range)	Normal Condition
START SW1	Start switch 1 / ON or OFF	ON: Power switch pushed OFF: Power switch not pushed
START SW2	Start switch 2 / ON or OFF	ON: Power switch pushed OFF: Power switch not pushed
STOP LAMP SW1	Stop light switch 1 / ON or OFF	ON: Brake pedal depressed OFF: Brake pedal released
IG1 RELAY M0N1	IG1 inner relay monitor / ON or OFF	ON: Power switch ON (IG) OFF: Power switch OFF
IG1 RELAY, MON2	IG1 outer relay monitor / ON or OFF	ON: Power switch ON (IG) OFF: Power switch OFF
IG2 RELAY MON1	IG2 inner relay monitor / ON or OFF	ON: Power switch ON (IG) OFF: Power switch OFF
IG2 RELAY M0N2	IG2 outer relay monitor / ON or OFF	ON: Power switch ON (IG) OFF: Power switch OFF
ACC RELAY MON	ACC relay monitor / ON or OFF	ON: Power switch ON (ACC) OFF: Power switch OFF
STR UNLOCK SW	Steering lock condition / ON or OFF	ON: Steering is unlocked OFF: Steering is locked
LATCH CIRCUIT	Latch circuit/ON or OFF	ON: Power switch ON (IG) OFF: Power switch OFF
ST REQUEST SIG	HV start request signal / ON or OFF	ON: STSW signal is ON OFF: STSW signal is OFF
VEHICLE SPD SIG	Vehicle speed signal / STOP or RUN	STOP: Vehicle is stopped RUN: Vehicle is running
READY SIG	READY condition / ON or OFF or UNKNOWN	ON: Power switch ON (READY) OFF: Power switch ON (IG) / (READY OFF) UNKNOWN: Power switch OFF
SHIFT P SIG	Shift position signal / ON or OFF	ON: Shift position is P OFF: Shift position is not P
PWR COND	Power supply condition / ALL, ACC ON, IG1 IG2, ST ON	ALL: All relays are OFF ACC ON: ACC relay is ON IG1: IG1 relay is ON IG2: IG2 relay is ON ST ON: STSW signal is ON
#CODE	Number of diagnosis codes / Min: 0, max: 255	-

Certification ECU:

CERTIFICATION ECU - DATA LIST REFERENCE

Item	Measurement Item / Display (Range)	Normal Condition
L CODE CHK	L code check / OK or NG	OK: L code certification result is normal NG: L code certification result is abnormal
S CODE CHK	S code check / OK or NG	OK: S code certification result is normal NG: S code certification result is abnormal
START RQST	Engine (hybrid) start request signal / YES or NO	YES: Engine (hybrid) start NO: Engine (hybrid) stop

PERFORM ACTIVE TEST

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

Connect the intelligent tester (with CAN VIM) to the DLC3
Turn the power switch ON (IG).

Perform the ACTIVE TEST according to the display on the tester.

Power source control ECU:

POWER SOURCE CONTROL ECU - ACTIVE TEST REFERENCE

Item	Test Details
LIGHTING IND	Indicator for lighting ON / OFF
IND CONDITION	Indicator Green / Amber / No Sig
STR LOCK PWR	Power supply for steering lock motor ON / OFF