LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 450h >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition >> Ignition Coil >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE SERVICE PLUG GRIP  (See REMOVAL )
  3. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  4. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL )
  5. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  6. REMOVE V-BANK COVER  (See REMOVAL )
  7. DISCONNECT NO. 2 VENTILATION HOSE  (See REMOVAL )
  8. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE  (See REMOVAL )
  9. REMOVE IGNITION COIL ASSEMBLY 
    1. Detach the 3 wire harness clamps and disconnect the noise filter connector.
      Fig 1: Locating Wire Harness Clamps
      G05303587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 6 ignition coil connectors.
    3. Remove the 6 bolts and the 6 ignition coils.
      Fig 2: Locating Ignition Coils Connector With Bolts
      G05287691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals