LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GX 470 V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module: Service and Repair

REMOVAL

1. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO. 2
2. REMOVE INSTRUMENT PANEL ORNAMENT
3. REMOVE GLOVE COMPARTMENT DOOR SUBASSEMBLY




4. REMOVE ECM

a. Disconnect the 5 ECM connector.
b. Remove the 3 nuts and ECM.
c. Remove the 2 screws and ECM bracket No. 1 from the ECM.
d. Remove the 2 screws and ECM bracket No. 2 from the ECM.

INSTALLATION




1. INSTALL ECM

a. Install the ECM bracket No. 2 with the 2 screws to the ECM.
b. Install the ECM bracket No. 1 with the 2 screws to ECM.
c. Install the ECM with the 3 nuts.

Torque: 13 N.m (133 kgf.cm, 10 ft.lbf)

d. Connect the 5 ECM connector.

2. INSTALL GLOVE COMPARTMENT DOOR SUBASSEMBLY
3. INSTALL INSTRUMENT PANEL ORNAMENT
4. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO. 2
scientia non olet · About LEMON Manuals