Height Control Sensor: Inspection

Fig 1: Identifying Rear Height Control Sensor Sub-Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the height control sensor sub-assembly rear LH or RH.
2. Connect 3 dry batteries of 1.5 V in series.
3. Height control sensor sub-assembly rear LH: Connect terminal 1 (SHB) to the batteries' positive (+) terminal, and terminal 3 (SHG) to the batteries' negative (-) terminal, then apply approximately 4.5 V between terminal 2 (SHRL) and 3 (SHG) in the following conditions.

   Standard voltage 

   VOLTAGE SPECIFICATION
   
   

   Position	Voltage
   High (0° to 45°)	Approx. 2.53 to 4.33 V
   Normal (0°)	Approx. 2.53 V
   Low (0° to -45°)	Approx. 0.81 to 2.53 V

4. Height control sensor sub-assembly rear RH: Connect terminal 1 (SHB) to the batteries' positive (+) terminal, and terminal 3 (SHG) to the batteries' negative (-) terminal, then apply approximately 4.5 V between terminal 1 (SHG) and 2 (SHRR) in the following conditions.

Standard voltage