LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GX 470 >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror >> Outer Mirror Control Ecu >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outer Mirror Control Ecu: Inspection

  1. INSPECT OUTER MIRROR CONTROL ECU 
    1. Disconnect the connector from the mirror control ECU assembly.
    2. Check the voltage or continuity of each terminal of the wire harness side connector.
      Fig 1: Identifying Outer Mirror Control ECU Connector Terminals
      G05266855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard 

      VOLTAGE AND RESISTANCE SPECIFICATION

      Terminal No. Switch Position Specified Condition
      1 - Body ground Constant 10 to 14 V
      2 - Body ground Ignition switch OFF → ACC 0 V → 10 to 14 V
      14 - Body ground Constant Below 1 Ω
      15 - Body ground Shift position P → R 0 V → 10 to 14 V

      If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Connect the connector to the mirror control ECU assembly.
    4. Check the voltage or continuity of each terminal of the wire harness side connector.
    Fig 2: Identifying Outer Mirror Control ECU Connector Terminals
    G05266855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Standard voltage 

    VOLTAGE SPECIFICATION

    Terminal No. Switch Position Specified Condition
    10 - Body ground Ignition switch ACC, Left/right adjustment switch L side, Mirror switch OFF → RIGHT or DOWN 0 V → 8 V or more
    11 - Body ground Ignition switch ACC, Left/right adjustment switch L side, Mirror switch OFF → LEFT 0 V → 8 V or more
    12 - Body ground Ignition switch ACC, Left/right adjustment switch L side, Mirror switch OFF → UP 0 V → 8 V or more
    22 - Body ground Ignition switch ACC, Left/right adjustment switch R side, Mirror switch OFF → RIGHT or DOWN 0 V → 8 V or more
    23 - Body ground Ignition switch ACC, Left/right adjustment switch R side, Mirror switch OFF → LEFT 0 V → 8 V or more
    24 - Body ground Ignition switch ACC, Left/right adjustment switch R side, Mirror switch OFF → UP 0 V → 8 V or more

    If the result is not as specified, replace the mirror assembly.

    Standard voltage 

    VOLTAGE SPECIFICATION

    Terminal No. Switch Position Specified Condition
    8 - Body ground Ignition switch ACC, Left/right adjustment switch L side, Mirror switch innermost → Outermost Approx. 4 V → 0.23 V
    9 - Body ground Ignition switch ACC, Left/right adjustment switch L side, Mirror switch uppermost → Lowermost Approx. 3.7 V → 0.27 V
    20 - Body ground Ignition switch ACC, Left/right adjustment switch L side, Mirror switch innermost → Outermost Approx. 4 V → 0.23 V
    21 - Body ground Ignition switch ACC, Left/right adjustment switch R side, Mirror switch uppermost → Lowermost Approx. 3.7 V → 0.27 V
    13 - Body ground Ignition switch OFF, All lights OFF, All doors closed and left untouched for 30 sec. or more → Any door open No Hz output (0 Hz) → Hz output
    25 - Body ground Ignition switch OFF, All lights OFF, All doors closed and left untouched for 30 sec. or more → Any door open No Hz output (0 Hz) → Hz output

    If the result is not as specified, replace the mirror assembly or the multiplex control may malfunction.

    Standard voltage 

    VOLTAGE SPECIFICATION

    Terminal No. Switch Position Specified Condition
    7 - Body ground Ignition switch OFF → ACC 0 V → 5 V

    If the result is not as specified, replace the mirror control ECU assembly.