Quarter Window Glass: Removal

HINT:

• The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.
• On the RH side, use the same procedures as on the LH side.

1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (See  REMOVAL  ) 
2. REMOVE QUARTER SCUFF PLATE INSIDE LH (See  REMOVAL  ) 
3. REMOVE REAR DOOR SCUFF PLATE LH (See  REMOVAL  ) 
4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH 
5. REMOVE BACK DOOR WEATHERSTRIP 
6. REMOVE REAR FLOOR MAT SUPPORT PLATE 
7. REMOVE QUARTER INSIDE TRIM BOARD LH (See  REMOVAL  ) 
8. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH (See  REMOVAL  ) 
9. REMOVE QUARTER WINDOW LOCK ASSEMBLY LH 
   1. Remove the screw and window lock assembly.
10. REMOVE QUARTER WINDOW ASSEMBLY LH 
    Fig 1: Identifying Quarter Window Assembly Bolts & Nuts

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connectors.
    2. Remove the 2 bolts and 2 nuts.
    3. Remove the window assembly LH.
       NOTE: Be careful not to damage the body and glass.