Starter Relay: Inspection

1. Continuity inspection.
   1. Using an ohmmeter, check that there is continuity between each terminal.
   Fig 1: Identifying Starter Relay Terminals And Circuit

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Standard 

   SPECIFIED CONDITION
   
   

   Between Terminals	Specified Condition
   1 - 2	Continuity
   3 - 5	No continuity

2. Using an ohmmeter, check that there is continuity between terminals 3 and 5 when voltage is applied across terminals 1 and 2.

Specified condition: 

Continuity