DTC P2118: Throttle Actuator Control Motor Current Range/Performance: Fail-Safe

When any of these DTCs, as well as other DTCs relating to Electronic Throttle Control System (ETCS) malfunctions, are set, the ECM enters fail-safe mode. During fail-safe mode, the ECM cuts the current to the throttle actuator off, and the throttle valve is returned to a 16° throttle angle by the return spring. The ECM then adjusts the engine output by controlling the fuel injection (intermittent fuel-cut) and ignition timing, in accordance with the accelerator pedal opening angle, to allow the vehicle to continue at a minimal speed.

If the accelerator pedal is depressed firmly and gently, the vehicle can be driven slowly.

Fail-safe mode continues until a "pass" condition is detected, and the ignition switch is then turned OFF.