Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection, Installation: ECM: Installation

INSTALL ECM

Fig 1: Identifying ECM Connector Nut & Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
1. Install the ECM bracket No. 2 with the 2 screws to the ECM.
2. Install the ECM bracket No. 1 with the 2 screws to ECM.
3. Install the ECM with the 3 nuts.
  Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
4. Connect the 5 ECM connector.
INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
INSTALL INSTRUMENT PANEL ORNAMENT
INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2