Torque Specifications
POWER STEERING - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| VANE PUMP ASSEMBLY | |||
| Vane pump housing rear x Vane pump housing front | 24 | 240 | 17 |
| Pressure port union | 83 | 850 | 61 |
| Suction port union set bolt | 13 | 130 | 9 |
| Vane pump assembly x Engine | 43 | 438 | 32 |
| Vane pump assembly x Stud bolt | 22 | 224 | 16 |
| Vane pump pulley set nut | 44 | 449 | 32 |
| Pressure feed tube assembly x Vane pump assembly | 51 | 520 | 38 |
| POWER STEERING LINK ASSEMBLY | |||
| Control valve housing set bolt | 18 | 184 | 13 |
| Bearing guide nut | 25 | 250 | 18 |
| Cylinder end stopper | 145 | 1,479 | 107 |
| Rack guide spring cap | 25 | 250 | 18 |
| Rack guide spring cap lock nut | 69 (65) | 700 (660) | 51 (48) |
| Power steering rack x Rack end | 103 (98) | 1,050 (1,000) | 76 (72) |
| Tie rod assembly lock nut | 88 | 897 | 65 |
| Turn pressure tube union nut | 25 (23) | 250 (230) | 18 (17) |
| Power steering link assembly set bolt and nut | 100 | 1,020 | 74 |
| Pressure feed and return tubes x Control valve housing | 44 (42) | 449 (428) | 32 (31) |
| Pressure feed tube clamp set bolt | 28 | 286 | 21 |
| Outlet return tube | 44 (42) | 449 (428) | 32 (31) |
| Outlet return tube clamp set bolt | 28 | 286 | 21 |
| Tie rod end x steering knuckle | 91 | 928 | 67 |
| Stabilizer bar front bracket set bolt | 40 | 408 | 30 |
| Stabilizer link x Steering knuckle | 70 | 714 | 52 |
(): For use without SST