LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GX 470 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Acceleration Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Acceleration Sensor: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE LH (See  REMOVAL  ) 
  3. REMOVE COWL SIDE TRIM BOARD LH (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 (See  REMOVAL  ) 
  5. REMOVE INSTRUMENT PANEL FINISH PLATE (See  REMOVAL  ) 
  6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT PANEL LOWER LH 
  8. REMOVE FRONT ACCELERATION SENSOR 
    1. Disconnect the connector from the front acceleration sensor.
      2. Fig 1: Identifying Front Acceleration Sensor Bolt
      G05262379Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove a bolt and the acceleration sensor.
  9. REMOVE NO. 2 REAR SEAT ASSEMBLY LH 
  10. REMOVE QUARTER SCUFF PLATE INSIDE LH 
  11. REMOVE REAR DOOR SCUFF PLATE LH 
  12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH 
  13. REMOVE BACK DOOR WEATHERSTRIP 
  14. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR 
  15. REMOVE QUARTER INSIDE TRIM BOARD LH 
  16. REMOVE REAR ACCELERATION SENSOR 
    Fig 2: Identifying Rear Acceleration Sensor, Clip & Bolt
    G05262380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector.
    2. Remove a clip, bolt and the rear acceleration sensor.
scientia non olet · About LEMON Manuals