LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GX 470 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Height Control Compressor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Height Control Compressor: Removal

  1. REMOVE REAR DISC WHEEL 
  2. REMOVE QUARTER PANEL MUDGUARD REAR LH 
  3. REMOVE FUEL TANK FILLER PIPE PROTECTOR 
    1. Remove the 4 clips and the fuel tank filler pipe protector.
  4. REMOVE HEIGHT CONTROL COMPRESSOR COVER 
    1. Remove the 3 clips and the height control compressor cover.
  5. REMOVE HEIGHT CONTROL FILTER 
    1. Disconnect the 2 clips and the 2 hoses.
    2. Remove the 2 bolts and the height control filter.
  6. DISCONNECT HEIGHT CONTROL TUBE NO. 2 
    Fig 1: Identifying Height Control Tube No. 2
    G04964530Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the holder.
    2. Spread the clip and slowly pull the height control tube No. 2 straight out.
      NOTE: Do not remove the clip from the union except when replacing it.
    3. Remove the 2 O-rings.
  7. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY 
    1. Disconnect the connector.
      2. Fig 2: Identifying Clamps
      G04964531Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 clamps.
      3. Fig 3: Identifying Height Control Compressor Bolts
      G04964532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 3 bolts.
    4. Disconnect the clip and remove the No. 1 hose.
      5. Fig 4: Identifying Height Control Compressor Assembly With Bracket & Bolts
      G04964533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the 3 bolts, the height control compressor and the dryer with the bracket.
    6. Remove the bolt, the dryer and the O-ring.
    7. Remove the 3 bushings from the height control compressor assembly.
scientia non olet · About LEMON Manuals