LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GX 470 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Suspension Control Ecu >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Suspension Control Ecu: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE LH (See  REMOVAL  ) 
  3. REMOVE COWL SIDE TRIM BOARD LH (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 (See  REMOVAL  ) 
  5. REMOVE INSTRUMENT PANEL FINISH PLATE 
  6. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT PANEL LOWER LH 
  8. REMOVE SUSPENSION CONTROL ECU 
    1. Remove the 2 nuts and a bolt, disconnect the junction block.
    2. Disconnect the connector from the suspension control ECU.
      3. Fig 1: Identifying Suspension Control ECU Bolts
      G05262371Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts and the suspension control ECU.
scientia non olet · About LEMON Manuals