Park/Neutral Position Switch: Inspection
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Jack up the vehicle.
- Disconnect the park/neutral position switch connector.
- Measure resistance according to the value (s) in the table below when the shift lever is moved to each position.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITIONShift Position Tester Connection Specified Condition P 2 - 6 and 4 - 5 Below 1 Ω Except P ↑ 10 kΩ or higher R 1 - 2 Below 1 Ω Except R ↑ 10 kΩ or higher N 2 - 9 and 4 - 5 Below 1 Ω Except N ↑ 10 kΩ or higher D and 4 2-7 Below 1 Ω Except D and 4 ↑ 10 kΩ or higher 3 2 - 3 Below 1 Ω Except 3 ↑ 10 kΩ or higher 2 and L 2 - 8 Below 1 Ω Except 2 and L ↑ 10 kΩ or higher