LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GX 470 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Park/Neutral Position Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Park/Neutral Position Switch: Installation

  1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    Fig 1: Identifying Park/Neutral Position Switch Bolt
    G04963368Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the park/neutral position switch with the bolt.

      Torque: 13 N*m (130 kgf*cm, 10 ft.*lbf) 

    2. Install a new lock washer and the nut.

      Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf) 

    3. Bend the claws on the lock washer to stake the nut.
  2. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR 
  3. CONNECT BATTERY NEGATIVE TERMINAL 
  4. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY (See  INSPECTION   ) 
  5. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY (See  ADJUSTMENT   ) 
  6. INSPECT SHIFT LEVER POSITION (See  ADJUSTMENT   ) 
  7. ADJUST SHIFT LEVER POSITION (See  ADJUSTMENT   ) 
scientia non olet · About LEMON Manuals