Data List/Active Test
- READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful as intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the engine switch on (IG).
- Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DATA LIST.
- Read the DATA LIST.
Power source control ECU:
POWER SOURCE CONTROL ECU - DATA LISTItem Measurement Item / Display (Range) Normal Condition Diagnostic Note STR UNLOCK SW Steering lock condition / ON or OFF ON: Steering is unlocked
OFF: Steering is locked- STOP LAMP SW1 Stop light switch 1 / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released- STSW1 Start switch 1 / ON or OFF ON: Engine switch is pushed
OFF: Engine switch is not pushed- STSW2 Start switch 2 / ON or OFF ON: Engine switch is pushed
OFF: Engine switch is not pushed- N SW / C SW Neutral start switch (A/T) clutch start switch (M/T) / ON or OFF ON: Shift position is P or N (A/T) clutch pedal depressed (M/T)
OFF: Shift position is neither P nor N (A/T) clutch pedal released (M/T)- LATCH CIRCUIT Latch circuit / ON or OFF ON: Engine switch on (IG) or engine running
OFF: Engine switch off, on (ACC)- IG1 RELAY MON1 IG1 outer relay monitor / ON or OFF ON: Engine switch on (IG)
OFF: Engine switch off- IG1 RELAY MON2 IG1 inner relay monitor / ON or OFF ON: Engine switch on (IG)
OFF: Engine switch off- IG2 RELAY MON1 IG2 outer relay monitor / ON or OFF ON: Engine switch on (IG)
OFF: Engine switch off- IG2 RELAY MON2 IG2 inner relay monitor / ON or OFF ON: Engine switch on (IG)
OFF: Engine switch off- ST RELAY MON STARTER relay monitor / ON or OFF ON: Engine is cranking
OFF: Engine is not crankingEngine is cranking with engine switch on (IG) and shift lever in P or N (A/T) or clutch pedal depressed (M/T) ST REQUEST SIG Starter request signal monitor / ON or OFF ON: ST relay is ON
OFF: ST relay is OFFEngine switch pressed and held with shift lever in P or N (A/T) or with clutch pedal depressed (M/T)
OFF: Engine switch offACC CUT SIG ACC relay cut signal / ON or OFF ON: Engine is cranking
OFF: Engine is not cranking- E/G COND Engine condition / STOP or RUN STOP: Engine is stopped
RUN: Engine is running- VEHICLE SPD SIG Vehicle speed signal / STOP or RUN STOP: Vehicle is stopped
RUN: Vehicle is running- SHIFT P PULSE Shift P position signal (A/T) / NORMAL1, NORMAL2, NORMAL3, ERROR1, ERROR2, ERROR3, UNKNOWN NORMAL1: Normal condition and shift position is condition unknown
NORMAL2: Normal condition and shift position is P
NORMAL3: Normal condition and shift position is not P
ERROR1: Malfunction condition and shift position is condition unknown
ERROR2: Malfunction condition and shift position is P
ERROR3: Malfunction condition and shift position is not P
UNKNOWN: Condition unknown- PWR COND Power supply condition / ALL, ACC ON, IG1 IG2, ST ON ALL: All relays are OFF
ACC ON: ACC relay is ON
IG1: IG1 relay is ON
IG2: IG2 relay is ON
ST ON: ST request signal is ON- #CODE Number of diagnostic codes / Min: 0, max: 255 - - - PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows the relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.
The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester to the DLC3
- Turn the engine switch on (IG).
- Enter the following menus: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST.
- Perform the ACTIVE TEST according to the display on the tester.
Power source control ECU:
POWER SOURCE CONTROL ECU - ACTIVE TEST DETAILSItem Test Details Diagnostic Note LIGHTING IND Indicator for lighting ON / OFF - IND CONDITION Indicator Green / Amber / No Sig - STR LOCK PWR Power supply for steering lock ECU ON / OFF -