On-Vehicle Inspection

1. Measure the resistance of the DEFOG relay.

   Standard 

   DEFOGGER RELAY
   
   

   Tester Condition	Specified Condition
   3 - 4	Below 1 ohms (when battery voltage is not applied between terminals)
   3 - 5	10 k ohms or higher (when battery voltage is not applied between terminals)
   3 - 5	Below 1 ohms (when battery voltage is applied to terminals 1 and 2)

If the result is not as specified, replace the relay. 

Fig 1: Inspecting Defogger Relay (Marking: Defog)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002