Light Control Rheostat: Removal

REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination) (See REMOVAL (For 2G-FSE) REMOVAL (For 4G-FSE) )
REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination) (See REMOVAL (For 2G-FSE) REMOVAL (For 4G-FSE) )
REMOVE FRONT DOOR OPENING TRIM COVER LH (See REMOVAL )
REMOVE SIDE INSTRUMENT PANEL LH (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE LIGHT CONTROL RHEOSTAT
1. Remove the 3 screws and the finish panel No. 2 retainer with switch.
  
  Fig 1: Identifying Screws And Finish Panel No. 2 Retainer With Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 2 claws and remove the light control rheostat from the finish panel No. 2 retainer.
  
  Fig 2: Identifying Light Control Rheostat From Finish Panel Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002