Meter / Gauge System: Precaution
- REMOVAL AND INSTALLATION OF THE BATTERY TERMINAL
- Before performing electrical work, disconnect the battery negative (-) terminal in order to prevent a short in the system.
- When disconnecting and reconnecting the battery terminal, engine switch and lighting switches off and loosen the terminal nut completely. Perform these operations without prying on the terminal.
- When the battery terminal is disconnected, the memories of the clock, radio, DTCs, etc. are erased. Before disconnecting the terminal, check and make a note of them.
NOTE: When disconnecting the battery negative (-) terminal, initialize the following system after the terminal is reconnected.METER / GAUGE SYSTEM
System Name See Procedure Power Window Control System INITIALIZATION