LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Automatic Transaxle) >> Shift Lever Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lever Assembly: Removal

WARNING: This page is about a different car, the 2007 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (See  REMOVAL  ) 
  2. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (See  REMOVAL  ) 
  3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (See  REMOVAL  ) 
  4. REMOVE CONSOLE PANEL SUB-ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY (See  REMOVAL  ) 
  6. REMOVE CONSOLE BOX REGISTER ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE CONSOLE BOX (See  REMOVAL  ) 
  8. REMOVE NO. 2 CONSOLE BOX DUCT (See  REMOVAL  ) 
  9. REMOVE NO. 1 REAR FLOOR PANEL BRACE (See  REMOVAL  ) 
  10. REMOVE FRONT CENTER FLOOR BRACE (See  REMOVAL  ) 
  11. REMOVE OXYGEN SENSOR (See  REMOVAL  ) 
  12. REMOVE FRONT EXHAUST PIPE ASSEMBLY (See  REMOVAL  ) 
  13. REMOVE FRONT FLOOR NO. 1 HEAT INSULATOR (See  REMOVAL  ) 
  14. REMOVE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Remove the nut and separate the floor shift gear shifting rod sub-assembly.
      Fig 1: Identifying Shifting Rod Nut
      G05317026Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. Disconnect the 2 connectors.
    2. Remove the 4 bolts.
    3. Remove the floor shift assembly.
      Fig 2: Identifying Connector To Floor Shift Assembly
      G05317027Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals