LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Child Restraint Seat Tether Anchor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Child Restraint Seat Tether Anchor: Installation

  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Install the 3 child restraint seat tether anchor brackets with the 3 bolts.

      Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf) 

      Fig 1: Identifying Child Restraint Seat Tether Anchor Bracket Bolt
      G05013665Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) (See  INSTALLATION   ) 
  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) (See  INSTALLATION   ) 
  4. INSTALL ROOF SIDE INNER GARNISH LH (See  INSTALLATION  ) 
  5. INSTALL ROOF SIDE INNER GARNISH RH 
  6. INSTALL REAR SEAT SIDE GARNISH LH (See  INSTALLATION  ) 
  7. INSTALL REAR SEAT SIDE GARNISH RH 
  8. INSTALL REAR DOOR SCUFF PLATE LH (See  INSTALLATION  ) 
  9. INSTALL REAR DOOR SCUFF PLATE RH 
  10. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY (See  INSTALLATION  ) 
  11. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY 
  12. INSTALL REAR SEAT HEADREST ASSEMBLY 
  13. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (See  INSTALLATION  ) 
scientia non olet · About LEMON Manuals