Front Seat Inner Belt Assembly: Installation

INSTALL FRONT SEAT INNER BELT ASSEMBLY
1. Install the front seat inner belt assembly with the nut.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.
2. Connect the connectors and attach the clamps.
  
  Fig 1: Identifying Front Seat Inner Belt Assembly Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SEAT ASSEMBLY (for Manual Seat) (See INSTALLATION )
INSTALL REAR INNER SEAT TRACK COVER (for Manual Seat) (See INSTALLATION )
INSTALL REAR OUTER SEAT TRACK COVER (for Manual Seat) (See INSTALLATION )
INSTALL FRONT INNER SEAT TRACK BRACKET COVER (for Manual Seat) (See INSTALLATION )
INSTALL FRONT OUTER SEAT TRACK BRACKET COVER (for Manual Seat) (See INSTALLATION )
INSTALL FRONT SEAT ASSEMBLY (for Power Seat) (See INSTALLATION )
INSTALL REAR INNER SEAT TRACK COVER (for Power Seat)
INSTALL REAR OUTER SEAT TRACK COVER (for Power Seat)
INSTALL FRONT INNER SEAT TRACK BRACKET COVER (for Power Seat)
INSTALL FRONT OUTER SEAT TRACK BRACKET COVER (for Power Seat)
INSTALL FRONT SEAT HEADREST ASSEMBLY
PERFORM INITIALIZATION
HINT:

Some systems need initialization after reconnecting the cable to the negative battery terminal. (See INITIALIZATION )
INSPECT SLIDE ADJUSTER LOCK (for Manual Seat)
INSPECT FRONT SEAT ASSEMBLY (for Power Seat)
(See INSTALLATION )
INSPECT SRS WARNING LIGHT
Inspect the SRS warning light. (See DIAGNOSIS SYSTEM )