How To Proceed With Troubleshooting

HINT:

• Use this procedure to troubleshoot the multiplex communication system.
• The intelligent tester should be used in step  2.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CHECK FOR DTC 
   1. Check for DTCs and note any codes that are output.
   2. Delete the DTC.
   3. Recheck for DTCs. Try to prompt the DTC by simulating the original activity that the DTC suggests.

      Result 

      RESULT DESCRIPTION TABLE
      
      

      Result	Proceed to
      DTC does not reoccur	A
      DTC reoccurs	B

   B: GO TO  DIAGNOSTIC TROUBLE CODE TABLE  

   A: Go to next step. 

3. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. See TERMINALS OF ECU 
4. ADJUST, REPAIR OR REPLACE 
5. CONFIRMATION TEST 

   END