Skid Control Buzzer: Installation

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Attach the claw and install the skid control buzzer assembly.
  
  Fig 1: Identifying Claw On Skid Control Buzzer Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the skid control buzzer assembly connector.
INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (See REMOVAL )
INSTALL LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL LH (See INSTALLATION )
CONNECT BATTERY NEGATIVE TERMINAL (See COMPONENTS (For IS350) COMPONENTS (For IS250) )
INSPECT SRS WARNING LIGHT
HINT:

(See DIAGNOSIS SYSTEM ).
PERFORM INITIALIZATION
HINT:

(See INITIALIZATION ).

Some system need initialization after reconnecting the cable to the negative battery cable.