Typical Enabling Conditions
ECT sensor cold start monitor:
TYPICAL ENABLING CONDITIONS - ECT SENSOR COLD START MONITOR
| Monitor runs whenever following DTCs are not present | P0100 - P0103: MAF meter P0110 - P0113: IAT sensor |
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| IAT sensor circuit | OK |
| Soak time | 0 seconds or more |
| Accumulated MAF | 1291 g or more |
| Engine | Running |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
ECT sensor soak monitor:
TYPICAL ENABLING CONDITIONS - ECT SENSOR SOAK MONITOR
| Monitor runs whenever following DTCs not present | P0100 - P0103: MAF meter P0110 - P0113: IAT sensor |
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| Either (a) or (b) condition met | - |
| (a) ECT | 60°C (140°F) or higher |
| (b) Accumulated MAF | 3641.5 g or more |