Torque Specifications

WARNING: This page is about a different car, the 2007 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

2GR-FSE

PROPELLER SHAFT TORQUE SPECIFICATIONS (2GR-FSE)

Part Tightened	N*m	kgf*cm	ft.*lbf
Intermediate shaft assembly x Adjusting nut	69	700	51
Intermediate shaft assembly x Adjusting nut: Using SST	51	520	38
Front floor heart insulator No.1 x	Body	5.4	55 48in.*lbf
Outside air guide plate RH x	Body	5.4	55 48in.*lbf
Propeller shaft assembly x Front flange	79	805	58
Propeller shaft assembly x Rear Differential companion flange	79	805	58
Center support bearing assembly No.1 x Body	49	500	36

4GR-FSE

PROPELLER SHAFT TORQUE SPECIFICATIONS (4GR-FSE)

Part Tightened	N*m	kgf*cm	ft.*lbf
Front propeller shaft x Transfer companion flange	25	255	18
Front propeller shaft x Differential companion flange	25	255	18
Intermediate shaft x Center support bearing assembly No.1: 1st	182	1,850	134
Intermediate shaft x Center support bearing assembly No.1: Loosen nut	-	-	-
Intermediate shaft x Center support bearing assembly No.1: 2nd	69	700	51
Propeller shaft assembly x Intermediate shaft assembly	74	750	54
Front floor heat insulator No.1 x	Body	5.4	55 48 in.*lbf
Outside air guide plate RH x	Body	5.4	55 48 in.*lbf
propeller shaft assembly x Rear Differential companion flange	74	750	54
Center support bearing assembly x Body	49	500	36